Counterbalance springs are spiral torsion
springs which are usually made of
rectangular section material. The torque
delivered per revolution is liner for the first
360 degrees. At greater angular rotations,
the coils begin to close on the arbor,
and the torque per turn increases rapidly.
For this reason, springs of this type are
usually in applications requiring less than
360 degrees of rotation.

A compression spring is an open-coiled
helical spring that offers resistance to a
compressive force applied axially.
Compression springs are usually coiled as a
constant-diameter cylinder. Other common
forms of compression springs such as conical,
concave (barrel), convex (hourglass, or
various combinations of these, are used as
required by the application). While square,
rectangular, or special selection wire
may have to be specified, round wire is
predominant in compression springs because
it is readily available and adaptable to
standard coiler tubing.

A constant force spring is a strip of flat spring
material which has been wound to a given
curvature so that in it's relaxed condition it
is in the form of a tightly wound coil or spiral.
Unlike conventional springs, constant force
springs produce a constant force or torque
regardless of their extension or number
of turns.

Extension springs are springs which absorb
and store energy by offering resistance to
a pulling force. The variety of ends available
is limited only by the imagination and
may include threaded inserts, reduced and
expanded eyes on the side or the center
of the spring, extended loops, hooks or eyes
at varying positions and even rectangular
or teardrop-shaped ends.

Torsion springs, whose ends are rotated in
angular deflection, offer resistance to
externally applied torque. The wire itself
is subjected to bending stresses rather than
torsional stress as might be expected from
the name. Springs of this type are usually
close wound, reduce in coil diameter
and increase in body length as they are
deflected.

HS Spring has state-of-the-art stamping
and slide forming capabilities and provides
high-quality for a variety of applications.
Our broad range of wire forms, clips, brackets
and stamped metal parts are found in a
variety of products.

Peace of mind never looked so good.

From retail electronics, to industrial tools,
to public displays, SLIDELINE™ is the
attractive, cost-effective way to secure what's
important to your business.

SLIDELINE™ attaches unobtrusively to
the product, allowing users comfort and
freedom of movement with a constant-force
retracting line of nylon-coated stainless
steel. The item stays securely tethered,
without inconveniencing your customers
or employees.

Seize every retail opportunity with SLIDELINE Pusher Systems™

SLIDELINE Pusher Systems™ maintain
retail shelves that are organized, attractive
and efficient. Products are neatly aligned in
appealing display trays, and spring tension
holds each row in place. When a customer
chooses an item, the next item automatically
is pushed to the front.

Applied Innovation

As an industry leader in spring products
and services, HS Spring is the natural
choice for building spring assemblies.
Springs are the basis of a wide variety
of industrial, commercial and consumer
products. Our solutions ensure added
value for the customer.

SLIDELINE™ Product Sheet

SLIDELINE Pusher System™ Product Sheet

Spring Assemblies Product Sheet

Constant Force Springs Product Sheet

Counterbalance Springs Product Sheet

Springs and Wire Forms Product Sheet

Stampings and Slide Forms Product Sheet